OIL WATER SEPARATOR - COMMERCIAL
COMMERCIAL APPLICATIONS:
FREYLIT Oil Separators (Mineral Oil and Residual Oil Separator) are designed to the exact specification and requirements of our client. The modular plate-pack system is the perfect solution for oil/water separation. FREYLIT Corrugated Coalescent Plate. Separators are the most economic method of treating process water efficiently.
HOW ITS WORKS
The oil contaminated water flows by gravity into the underground oil water separator tank. Inside this tank the FREYLIT Installation kit is installed. The waste water enters the silt chamber section of the FREYLIT oil separator through an inlet pipe with integrated automatic shut off. Then the waste water flows into the oil separator section. Since the design provides for an inlet deflector, the oil/water flow is deflected, which generates a current in the direction of the oil collection layer (separator surface). Consequently, the big oil drops rise faster towards the oil layer. Then, the water (which still contains oil droplets) flows through the PLATE PACK SECTION of the separator. Oleophilic, horizontal non-corroding corrugated coalescent plates are used for removing the residual oil.
A submersed outlet pipe prevents the oil collected on the surface off the water to exit from the oil separator.
A sample taking point is located at the top of the submersed outlet pipe. The sample taking point can be accessed when the screw on lid is removed.
